Development and flight tests of a gyro-less wing leveler and directional autopilot

A gyro-less wing leveler and directional autopilot were developed and flight tested in a single-engine light airplane. The primary purpose of the project was to develop a simple, reliable, low-cost stability augmentation and autopilot system for light aircraft. The wing leveler used a fluidic inertial rate sensor, electronic signal processing circuitry, and vacuum operated servos. A strap-down magnetic heading reference of simple design provided the wing leveler with directional autopilot capability. Flight tests indicated that the performance of the gyro-less wing leveler was equal to that of a commercial wing leveler using a gyroscopic rate sensor. Drift-free, long-term, heading-hold capability of the magnetic heading reference was demonstrated

Low energy operation of the DIAMOND light source

Abstract Within the last decade storage ring free-electron lasers (SRFELs) have reached UV output wavelengths and beyond: several facilities have achieved down to 250nm and quite recently below 200nm. The design of DIAMOND, the third-generation replacement for the existing SRS light source at Daresbury Laboratory, has been optimised at 3 GeV to provide high quality output for the scientific community, mainly from a range of insertion devices. In this paper we propose an additional DIAMOND regime at 1-1.5 GeV in an attempt also to include an SRFEL which would be of major benefit to users needing high quality, high brightness UV/VUV radiation. Such variable ring operating energy will have significant implications, not least in achieving acceptable beam lifetimes. In addition, enhanced beam coherent instabilities (notably microwave) at low energy will affect the single bunch length (peak current) and energy spread which will in turn limit the achievable FEL gain. All these factors will have to be assessed in the detailed design stages of DIAMOND. DIAMOND LIGHT SOURCE The recent successful demonstration of an SRFEL on the ELETTRA light source [1], together with earlier experience at LURE (Super-ACO) and elsewhere, has encouraged interest in the incorporation of such advanced facilities in all leading light sources. The normal operating mode of DIAMOND at 3GeV is described in detail elsewhere FEL OPERATING MODE When operating in optimised FEL mode, the storage ring will be populated with bunches spaced apart in time by twice the round trip time in the FEL cavity, ensuring energy transfer occurs as frequently as possible; the cavity length is always chosen to be a sub-harmonic of the storage ring circumference, whilst satisfying other, practical constraints. The final circumference of the DIAMOND storage ring has not yet been fixed but may be finalised at 528 m (an increase on the present 489 m layout [2] to budget for additional elements), giving a harmonic number of 880 at 500 MHz RF frequency. With 8 equally spaced bunches this leads to a required cavity length of 33 m, which is reasonable (cf. the ELETTRA device which has a cavity length of 32.4 m [1]). Since a very small vertical emittance is not necessary for FEL operation, a conservative coupling value of 3% has been assumed for these calculations, which should both be readily achievable and provide a satisfactory Touschek lifetime; both greater coupling and larger emittance could be selected if necessary. The momentum acceptance will be the primary limit on the beam lifetime at low energies, via Touschek scattering and quantum lifetime; the 4% dynamic and physical acceptance limit specified for 3 GeV operation BUNCH MODELLING To provide peak currents of tens of Amperes, as will be needed for useful FEL gains, bunch currents of several milliamperes are required. At these currents the effects of bunch lengthening from potential well distortion (PWD) and from the microwave instability (MI) are large, but are beneficial in that they provide low enough number densities within the bunches to give an acceptable Touschek lifetime; however the issue is whether sufficient peak current can then be maintained, together with acceptable energy spread. The ZAP code [3] was used to predict the effect on bunch parameters of PWD and MI (details are given in [4]); however, the implementation of Brück's approximatio

Perfecting the market's knowledge of monetary policy

The rational expectations revolution made clear that a complete macro model requires a specification of the government's economic policy. We argue that monetary policy should be conducted in such a way that the market can predict policy actions. An implication of market success in predicting policy actions is that interest rates move ahead of the policy actions, and such a timing relationship may appear to some as the central bank following the market instead of leading it. Another implication of the market predicting policy actions is that nominal interest rate changes provide no useful information to the central bank about the strength of aggregate demand or inflationary expectations. Finally, the failure of the market to predict policy actions reflects a problem that needs to be addressed. We explore the theoretical implications of a monetary policy that is completely specified and perfectly understood by the market. We construct a bare-bones model to illustrate the key concepts. Finally, we conduct an empirical investigation of these issues, especially in the context of monetary policy since 1988 when the establishment of the federal funds future market made available well-defined market information on expectations about Fed policy actions.Monetary policy ; Federal funds rate

The impact of changes in FOMC disclosure practices on the transparency of monetary policy: are markets and the FOMC better "synched"?

This analysis examines how expectations of market participants about future Federal Open Market Committee policy actions have changed over the period since 1989, during which the FOMC made a sequence of changes to improve the transparency of monetary policy.Monetary policy - United States ; Federal Open Market Committee

Flation

“Flation” is an article adapted from a speech of the same title presented before the International Mass Retail Association Leadership Forum, Scottsdale, Arizona, January 21, 2002.Monetary policy ; Inflation (Finance) ; Deflation (Finance)

Phase diagram of the ST2 model of water

We evaluate the free energy of the fluid and crystal phases for the ST2 potential [F.H. Stillinger and A. Rahman, J. Chem. Phys. 60, 1545 (1974)] with reaction field corrections for the long-range interactions. We estimate the phase coexistence boundaries in the temperature-pressure plane, as well as the gas-liquid critical point and gas-liquid coexistence conditions. Our study frames the location of the previously identified liquid-liquid critical point relative to the crystalline phase boundaries, and opens the way for exploring crystal nucleation in a model where the metastable liquid-liquid critical point is computationally accessible

CP-nets: A Tool for Representing and Reasoning withConditional Ceteris Paribus Preference Statements

Information about user preferences plays a key role in automated decision making. In many domains it is desirable to assess such preferences in a qualitative rather than quantitative way. In this paper, we propose a qualitative graphical representation of preferences that reflects conditional dependence and independence of preference statements under a ceteris paribus (all else being equal) interpretation. Such a representation is often compact and arguably quite natural in many circumstances. We provide a formal semantics for this model, and describe how the structure of the network can be exploited in several inference tasks, such as determining whether one outcome dominates (is preferred to) another, ordering a set outcomes according to the preference relation, and constructing the best outcome subject to available evidence